Consideration on utilization of atmospheric dispersion models for a nuclear emergency preparedness and response

Togawa, Orihiko; Okura, Takehisa; Kimura, Masanori; Nagai, Haruyasu

JAEA-Review 2021-021, 61 Pages, 2021/11

JAEA-Review-2021-021.pdf:3.72MB

Triggered by the Fukushima Daiichi Nuclear Power Station accident, there have been a lot of arguments among various situations and levels about utilization of atmospheric dispersion models for a nuclear emergency preparedness and response. Most of these arguments, however, were alternative and extreme discussions on whether predictions by computational models could be applied or not for protective measures in a nuclear emergency, and it was hard to say that these arguments were politely conducted, based on scientific verification in an emergency response. It was known, on the other hand, that there were not a few potential users of atmospheric dispersion models and/or calculation results by the models within the Japan Atomic Energy Agency (JAEA) and outside. However, they seemed to have a lack of understanding and a misunderstanding on proper use of different kinds of atmospheric dispersion models. This report compares an outline of models and calculation method in atmospheric dispersion models for a nuclear emergency preparedness and response, with a central focus on the models which have been developed and used in the JAEA. Examples of calculations by these models are also described in the report. This report aims at contributing to future consideration and activities for potential users of atmospheric dispersion models within the JAEA and outside.

Development of measurement system of radioactive plume using unmanned airplane in the fiscal year 2018 (Contract research)

Sanada, Yukihisa; Ochi, Kotaro; Ishizaki, Azusa

JAEA-Research 2020-006, 60 Pages, 2020/07

JAEA-Research-2020-006.pdf:4.84MB

At the accident of nuclear facilities, a prediction of the behavior of released radioactive plume is indispensable to make a decision on a refuge plan of inhabitants. Currently, prediction system which is based on atmospheric dispersion simulation has been implemented as a tool of the atomic energy disaster prevention. However, the direct measurement method of the radioactive plume has not existed. In this study, some component technologies were developed for the establishment of direct measurement methods of radioactive plume using unmanned aerial vehicle whose technological innovation is remarkable. In addition, the spray test using mock aerosol was conducted to obtaining the deposition rate to the airplane body. The algorism of making a flight plan was developed based on a prediction model of the radioactive plume. This report summarized the outcome of the last year of the three-year plan.

Effect of defocusing on laser ablation plume observed by laser-induced fluorescence imaging spectroscopy

Oba, Masaki; Miyabe, Masabumi; Akaoka, Katsuaki; Wakaida, Ikuo

Japanese Journal of Applied Physics, 55(2), p.022401_1 - 022401_4, 2016/02

https://doi.org/10.7567/JJAP.55.022401

We used laser-induced fluorescence imaging with a varying beam focal point to observe ablation plumes from metal and oxide samples of gadolinium. The plumes expand vertically when the focal point is far from the sample surface. In contrast, the plume becomes hemispherical when the focal point is on the sample surface. In addition, the internal plume structure and the composition of the ablated atomic and ionic particles also vary significantly. The fluorescence intensity of a plume from a metal sample is greater than that from an oxide sample, which suggests that the number of monatomic species produced in each plume differs. For both the metal and oxide samples, the most intense fluorescence from atomic (ionic) species is observed with the beam focal point at 3-4 mm (2 mm) from the sample surface.

Diagnostics of pulsed plasma in laser ablation of boron compounds

Oba, Hironori; Saeki, Morihisa; Yokoyama, Atsushi

Proceedings of Plasma Science Symposium 2005/22nd Symposium on Plasma Processing (PSS-2005/SPP-22), p.331 - 332, 2005/01

A plasma produced by a XeCl laser ablation of boron compound was investigated using ion probes and a quadrupole mass spectrometer. Although the ablated neutral boron atoms had a natural abundance ratio, the isotope ratio of singly ionized boron atoms having a greatly different from the natural abundance ratio was observed. The observed isotope ratio of boron ions was different from the natural abundance.

Treatment of photon energy released from a nuclide for estimation of the gamma doses due to radioactive plumes

Hidaka, Akihide;

Nihon Genshiryoku Gakkai-Shi, 29(11), p.1023 - 1029, 1987/11

https://doi.org/10.3327/jaesj.29.1023

no abstracts in English

AIRGAMMA:A Computer code for quick assessment of the cloudshine doses due to accidental releases of radioactive materials

Hidaka, Akihide;

Hoken Butsuri, 20, p.33 - 42, 1985/00

https://doi.org/10.5453/jhps.20.33

no abstracts in English

The Rise of Cold Plume - Results of a Field Experiment and Comparison with some Estimation Formulas

JAERI-M 7127, 14 Pages, 1977/06

JAERI-M-7127.pdf:0.64MB

no abstracts in English

Large-eddy simulation of plume dispersion during the Fukushima Daiichi Nuclear Power Plant accident by coupling with a meso-scale meteorological simulation model

Nakayama, Hiromasa; Takemi, Tetsuya*; Nagai, Haruyasu

no journal, , 

A significant amount of radioactive material was accidentally discharged into the atmosphere from the Fukushima Dai-ichi Nuclear Power Plant (FDNPP) from March 12, 2011. In conducting regional-scale atmospheric dispersion simulations, the nuclear emergency response system based on a meso-scale meteorological model (MM) was used. However, it is impossible to conduct detailed simulations of plume dispersion considering the turbulent effects in a local-scale because buildings, structures, and local terrain variability are not explicitly represented at high grid resolutions in those models. Therefore, an approach to couple an LES-based CFD model with a MM model should be promising. In this study, first we conduct LESs of plume dispersion around the FDNPP under a constant meteorological condition by prescribing constant mean wind velocities and directions at the inlet boundary condition, and then do them under a varying meteorological condition by coupling with a MM model. Our objective is to compare plume dispersion patterns under those different meteorological conditions and evaluate the effectiveness of the coupling computational method.